Chicco Fit360 ClearTex

Fit360
Rear-facing: 4-40 lbs. | Less than 43″
Forward-facing: 26.5-65 lbs. | 49″ or less

Pros:
  • LeverLock Door belt tensioning lockoff
  • ClearTex naturally chemical flame retardant free and machine washable
  • Extra bases available as well as an optional rear-facing mirror accessory
Cons:
  • Rotation isn’t as naturally smooth as it should be for a Chicco product
More info

Disclosure: As an Amazon Affiliate I earn from qualifying purchases. Thank you so much for supporting CarSeatSite if you choose to make a purchase! By purchasing through my links, you don’t pay extra but the commission I earn allows me to pay for website fees.

Specifications 

Rear-Facing

Weight limits: 4-40 lbs.
Height limits: Less than 43″

Forward-Facing

Weight limits: 22-65 lbs.
Height limits: 49″ or less
Age limits: 1+ years old

A lockoff is a built-in feature that locks your seat belt for you. When a lockoff is present, you will not need to engage the locking mechanism of the seat belt.

A belt tensioner tightens the seat belt for you with little effort; it uses leverage to make the job easier. It presses the belt into a channel(s) to shorten it mechanically and create the tension.

load leg

A load leg rests on the floor of the vehicle and manages crash energy to reduce head injury in rear-facing carseats. It’s available on 2 convertible models. Not all vehicles allow load legs.

Poplar S ARB

An anti-rebound bar (ARB) is an energy management feature that helps stabilize a rear-facing carseat and stops it from pivoting around its belt path. ARBs can be found on rear-facing only infant seats and on convertible/all-in-one seats.

Widest point: 18 ¼”
Highest harness height: 18”

Installation/Vehicle Info

Rotation direction: 360°

Lockoff: Yes
Belt-tensioner for easy install: Yes

Load leg: No
Anti-rebound bar: Yes

Manufacturer’s preferred method of installation: Seat belt

CarSeatSite notes on installation: If the seat belt slips through the LeverLock Door, Chicco approves locking the seat belt at the retractor after making sure the installation is tight.

Vehicle seat protectors: Not allowed

Flame retardant free covers available: Yes

FAA approved: FF mode only

Crash replacement guidelines: Replace after any crash

Fit to Child

Harness type: No-rethread

Inserts: Body positioner (use with head positioner; 4-11 lbs.; must remove at 11 lbs.), head positioner (use with body positioner; 4-11 lbs.; must remove at 11 lbs.), flex-forward crotch pad (optional), hip pads (optional; keep buckles from sliding down under child), shoulder pads (optional)

Newborn fit: Excellent

Lifespan/expiration: 8 years

Comments
As with any rotating carseat, the Fit360 must be locked into rear- or forward-facing position before driving—whether or not the child is in the carseat.